Product Name : Carbon Steel Pipe
Material: A53 Gr.B,A36,ST52,ST35,ST42,ST45,X42,X46,X52,X60,X65X70
Standard： API 5L,ASTM A106 Gr.B,ASTM A53 Gr.B,ASTM A179/A192,ASTM A513,ASTM A671,ASTM A672,BS EN 10217,BS EN10296,BS EN 39,BS6323,DIN, EN10217
Certificates ：API 5L,ISO9001,SGS,BV,CCIC
Outer Diameter ：15mm-1200mm
Length :1m,4m,6m,8m,12m according to buyer's request
Surface Treatment :black paint,varnish,oil,galvanized,anti-corrosion coated
Marking: Standard marking,or according to your request.Marking Method:Spray white paint
End Treatment: Plain End/Bevelled End/Grooved End/Threaded End With Plastic Caps

​Standard ：ASTM EN DIN GB ISO JIS BA ANSI
Steel Grade： Q195, Q215,Q235,Q345,ST37, A36,45# ,16Mn, SPHC,SGCC,CGCC
Thickness：0.2-100mm or Customized
Width ：1250-2500mm,or as Your Request ( regular width 1000mm, 1250mm, 1500mm )
Coil ID ：508mm or 610mm
Coil Weight ：3 - 8 ton or as Your Request
Technique： Hot rolled cold rolled as Your Request
Surface ：Treatment Bare,Black,Oiled,Shot Blasted,Spray Paint,Coated,Galvanized,or as Your Request
Package ：Standard Export packing(Plastic film in the first layer,second layer is Kraft paper. Third layer is galvanized sheet)

Carbon steel, on the other hand, has far lower chromium levels, and is instead a carbon-iron alloy with only a few other materials, if any, as part of its makeup. As a result, it can be referred to as ‘low-alloy’ steel. Both stainless steel and carbon steel feature this basic composition, but carbon steel can be defined by its carbon content. This is normally around 2-2.5%, however this often varies. Though susceptible to rust unlike stainless steel, carbon steel is often cheaper and has its own varying mechanical properties based on carbon content.

Material ：BS4449, Gr460B,Gr500B, GB1449.2, HRB335, HRB400, HRB500,HRB400E,HRB500E, ASTM A615, GR40/GR60/GR75, JIS G3112,SD390,SD360 KoreaStandarsKS D 3504 SD400 SD500 SD600, AustralasianStandard GR500N
Size：6mm,8mm,10mm, 12mm, 13mm, 14mm, 16mm, 20mm, 22mm, 25mm, 30mm, 32mm, 40mm,50mm
Length： 5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques
Standard: BS4449-2005,GB1449.2-2007,JIS G3112-2004, ASTM A615-A615M-04a,Korea StandarsKS D 3504, AustralasianStandard AS/NZS 4671
Grade: Grade A, Grade B, Grade C
Section Shape ： Spiral Shape,Herringbone Shape,Crescent Shape
Technique: Steel Rebar Iron Rod
Packing :Bundle, or with all kinds of colors PVC or as your requirements Ends Plain end/Beveled,protected by plastic caps on both ends, cut quare,grooved,threaded and coupling,etc.

Hot-dip galvanized iron wire is made with choice low carbon steel wire, through wire drawing, acid washing and rust removing, annealing and coiling. It's mainly used in construction, handicrafts, woven wire mesh, express way fencing mesh, packaging of products and other daily uses.
Size range: BWG 8-BWG 36
Zinc coat: 30-275 g/m2
Tensile strength: 350-550N/mm2
Elongation: 10%
Packing: 1-500kgs/coil, coil with plastic cloth inside and hessian outside or weave outside

Product name: Galvanized steel tube/pipe
Main standard: GB,JIS,DIN,AISI,ASTM
Length: AS customer's required
Surface: Mild steel plain finish, hot dip galvanized, pre galvanized, color coated, ect.
Diameter: 0.2-2000mm As customer's required
Shipment time: Stock or within 7-20 workdays according to quantity,after receiving deposit or L/C
Price term: T/T,L/C,Western Union,Paypal,Apple Pay,Google Pay,D/A,D/P,MoneyGram
Weight Calculation: Weight(kg)=Thickness(mm)*Width(m)*Length(m)*Density(7.85g/cm3)
Size Tolerance: ±1%-3%

Galvanized coil, the thin steel sheet is immersed in a molten zinc tank to make a layer of zinc thin steel sheet adhered to its surface.
It is mainly produced by continuous galvanizing process, that is, the rolled steel sheet is continuously immersed in a plating tank with molten zinc to make a galvanized steel sheet; alloyed galvanized steel sheet. This steel sheet is also made by hot dip method, but after leaving the tank, it is immediately heated to about 500℃ to form an alloy film of zinc and iron. This galvanized coil has good coating adhesion and weldability.