​Stainless steel is a steel alloy with increased corrosion resistance compared to carbon/alloy steel.

Common alloying ingredients include chromium (usually at least 11%), nickel, or molybdenum. Alloy content often is on the order of 15-30%.
Common applications for stainless steel include food handling/processing, medical instruments, hardware, appliances, and structural/architectural uses.

Hot-rolled steel coil products have excellent properties such as high strength, good toughness, easy processing and good weldability, and are widely used in manufacturing industries such as steel, construction, machinery, boilers, and pressure vessels.

Galvanized coil, the thin steel sheet is immersed in a molten zinc tank to make a layer of zinc thin steel sheet adhered to its surface.
It is mainly produced by continuous galvanizing process, that is, the rolled steel sheet is continuously immersed in a plating tank with molten zinc to make a galvanized steel sheet; alloyed galvanized steel sheet. This steel sheet is also made by hot dip method, but after leaving the tank, it is immediately heated to about 500℃ to form an alloy film of zinc and iron. This galvanized coil has good coating adhesion and weldability.

stainless steel plate is one of the most popular steel plates across the globe for a mix of its favorable characteristics. stainless steel is mainly composed of iron, chromium and nickel. This combination leads to outstanding oxidation resistance and corrosion resistance of stainless steel plates. The stainless steel plate has a smooth surface, high plasticity, toughness and mechanical strength, and is resistant to corrosion by acids, alkaline gases, solutions and other media. Due to its good versatility and relatively low cost, stainless steel plate is widely used in food processing equipment, building materials, automobile parts and other fields.

Carbon steel, on the other hand, has far lower chromium levels, and is instead a carbon-iron alloy with only a few other materials, if any, as part of its makeup. As a result, it can be referred to as ‘low-alloy’ steel. Both stainless steel and carbon steel feature this basic composition, but carbon steel can be defined by its carbon content. This is normally around 2-2.5%, however this often varies. Though susceptible to rust unlike stainless steel, carbon steel is often cheaper and has its own varying mechanical properties based on carbon content.

Hot-dip galvanized steel sheet. The thin steel sheet is immersed in a molten zinc tank to make a layer of zinc thin steel sheet adhered to its surface. It is mainly produced by continuous galvanizing process, that is, the rolled steel sheet is continuously immersed in a plating tank with molten zinc to make a galvanized steel sheet;
Electro-galvanized steel sheet. This galvanized steel sheet made by electroplating has good processability. But the coating is thin and the corrosion resistance is not as good as hot-dip galvanized sheet;

Product Name : Carbon Steel Pipe
Material: A53 Gr.B,A36,ST52,ST35,ST42,ST45,X42,X46,X52,X60,X65X70
Standard： API 5L,ASTM A106 Gr.B,ASTM A53 Gr.B,ASTM A179/A192,ASTM A513,ASTM A671,ASTM A672,BS EN 10217,BS EN10296,BS EN 39,BS6323,DIN, EN10217
Certificates ：API 5L,ISO9001,SGS,BV,CCIC
Outer Diameter ：15mm-1200mm
Length :1m,4m,6m,8m,12m according to buyer's request
Surface Treatment :black paint,varnish,oil,galvanized,anti-corrosion coated
Marking: Standard marking,or according to your request.Marking Method:Spray white paint
End Treatment: Plain End/Bevelled End/Grooved End/Threaded End With Plastic Caps